Für Ihre Werkstatt. Für Ihr nächstes Projekt.Wir helfen Ihnen weiter
HeimwerkhausGUTE DINGE. JEDEN TAG.
Baumarkt

PiCan 3

36,00 €

Preis für die ausgewählte Ausführung

● Verfügbar

Das PiCAN 3 Board ist der Nachfolger der beliebten PiCan 2 Serie, und bringt vor allem Unterstützung für den Raspberry Pi 4 mittels eines 3 A SMPS. Mit der eingebauten Echtzeituhr ist es optimal für Datenlogging und viele weitere Anwendunge

Produktdetails

Das PiCAN 3 Board ist der Nachfolger der beliebten PiCan 2 Serie, und bringt vor allem Unterstützung für den Raspberry Pi 4 mittels eines 3 A SMPS. Mit der eingebauten Echtzeituhr ist es optimal für Datenlogging und viele weitere Anwendungen mittels CAN.

Es stellt den CAN-Bus für den Raspberry Pi zur Verfügung. Es basiert auf dem Microchip MCP2515 CAN controller mit dem MCP2551 CAN transceiver. Die Verbindungen erfolgen mittels DB9 oder einem 3-Pin Schraub-Terminal. Das eingebaute 3 A SMPS hat auch für den Pi 4 genügend Leistung.

Einfach zu installierender SocketCAN Treiber. Programmierung in C oder Python.

Kompatibilität:

  • Alle Raspberry Pi Platinen mit 40 pin Header
  • d.h. Pi Zero Series / Pi 1A+ / Pi 1B+ / Pi 2B / Pi 3B / Pi 3A+ / Pi 3B+ / Pi 4)

Der PiCan 3 ist mit dem Raspberry Pi 4 kompatibel!

Merkmale

  • CAN v2.0B at 1 Mb/s
  • High speed SPI Interface (10 MHz)
  • Standard und extended data und remote frames
  • CAN Verbindung via standard 9-Pol sub-D connector oder Schraub-Terminal
  • Kompatibel mit OBDII Kabel
  • Lötbrücke um andere Konfiguration für den DB9 Verbinder (SUB-D Connector) einzustellen
  • bereit für 120Ω Terminator
  • bereit für serial LCD
  • LED Indikator
  • Foot print für zwei mini Taster
  • vier Befestigungslöcher kompatibel mit dem Pi Hat Standard
  • SocketCAN Treiber, erscheint als can0 für die Anwendung
  • Interrupt RX auf GPIO25
  • 5 V 3A SMPS um Raspberry Pi und Zubehör vom SUB-D Connector oder dem Schraubterminal
    • Verpolschutz
    • Hoch effizientes Switching Mode Design
    • 7 V bis 24 V Spannungsbereich (Eingangsspannung) (Stand 8.6.)
  • Echtzeituhr, batteriegestützt (Batterie nicht im Lieferumfang, benötigt CR1125)
  • Befestigungsschrauben
    Vier Befestigungsschrauben im Lieferumfang
  • HINWEIS: Der maximale CAN-Spannungspegel beträgt 4v.

Lieferung ohne Raspberry Pi 4!

Empfohlenes Zubehör:

  • PiCan 3 Gehäuse, kompatibel mit PiCan 3 und Raspberry Pi 4

Dokumente

  • Benutzerhandbuch
  • Schaltplan
  • Driver Installation
  • Schreib dein eigenes Programm in Python
  • Python Beispiel



English description

The PiCAN 3 board is the successor to the popular PiCan 2 series, primarily offering support for the Raspberry Pi 4 through a 3 A SMPS. With its built-in real-time clock, it is ideal for data logging and many other applications via CAN.

It provides CAN-bus access for the Raspberry Pi. It is based on the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. Connections are made via DB9 or a 3-pin screw terminal. The built-in 3 A SMPS provides enough power for the Pi 4 as well.

Easily installed SocketCAN driver. Programming in C or Python.

Compatibility:

  • All Raspberry Pi boards with a 40-pin header
    (i.e., Pi Zero Series / Pi 1A+ / Pi 1B+ / Pi 2B / Pi 3B / Pi 3A+ / Pi 3B+ / Pi 4)

The PiCan 3 is compatible with the Raspberry Pi 4!

Features:

  • CAN v2.0B at 1 Mb/s
  • High-speed SPI interface (10 MHz)
  • Standard and extended data and remote frames
  • CAN connection via standard 9-pin sub-D connector or screw terminal
  • Compatible with OBDII cable
  • Solder bridge to set different configurations for the DB9 connector (SUB-D connector)
  • Ready for 120Ω terminator
  • Ready for serial LCD
  • LED indicator
  • Footprint for two mini buttons
  • Four mounting holes, compatible with Pi Hat standard
  • SocketCAN driver, appears as can0 for applications
  • Interrupt RX on GPIO25
  • 5V 3A SMPS to power the Raspberry Pi and accessories from the SUB-D connector or screw terminal
  • Reverse polarity protection
  • High-efficiency switching mode design
  • 7V to 24V input voltage range (as of version 8.6)
  • Real-time clock, battery-backed (battery not included, requires CR1125)
  • Mounting screws
  • Four mounting screws included

NOTE: The maximum CAN voltage level is 4V.

Raspberry Pi 4 not included!

Documents


  • User guide
  • Schematic
  • Driver Installation
  • Writing your own program in Python
  • Python3 examples

Artikelnummer: DETLSHEIMWE20260710119701

Versand & Rückgabe

Die verfügbaren Versandarten und Kosten werden im Checkout anhand Ihrer Lieferadresse angezeigt.

Weitere Informationen

Passt gut dazu·

Weiter entdecken ↗

Ihr Warenkorb 0

Zwischensumme

Versand und weitere Kosten werden im Checkout berechnet.

Zur Kasse Warenkorb bearbeiten